Regular gasoline engines are 150 to 200 horsepower, and if is diesel engines, it can reach 200 to 250 horsepower.

For customers who cooperate with our company for the first time, we will provide expedited delivery activities (30-40 days).

1. We can take you on a video call to show you around our factory.

2. You can find out more about our company by clicking on YouTube and watching the video.

Our conrods of S/E bushing dowel is HB200.

We have a large number of mature databases. Even if you provide little data, we can minimize source errors during our design. And our products are 100% tested.
 

The rod bolt material is L19

The heat terat is HRC 34-38.

Yes, this is widely used in aerospace's main load-bearing components. And our heat treatment hardness is HRC40-44, which is significantly better than 4340.

Yes, just provide us with any simple data or sample and we can design it for you with our extensive in-house database.

We support three kinds of surface design: (1) original shot blasting (2)shot blasting + grinding bright surface (3)shot blasting + gold titanium nitride

The tried, true, and very popular ARP 2000 material is a quench and tempered heavily alloyed martensitic steel with a typical 44-47 C- scale Rockwell hardness and rated at 220,000 psi tensile strength.

The ARP Custom age 625 + counterparts are comprised of a higher tensile strength super-alloy corrosion resistant material, also quench and temper heat treated, to a robust 260,000psi. 

4032 chemical element including: Si: 11.0 – 13.5%  Mg: 0.80 – 1.30%  Cu: 0.50 – 1.30%  Ni: 0.50 – 1.30%  Cr: ≤ 0.10%  Zn: ≤ 0.25%  Fe: ≤ 1.0%  Al: 81.1 – 87.2%  Other each: ≤ 0.050%  Other total: ≤ 0.15%  You can go for our CERTIFICATION page for Hurricane 4032 piston chemical element Test Report.

We will respond to you in a timely manner,welcome to leave message at contact us page.

 T/T, PayPal and West Union

Air-express: FedEx,DHL,UPS,TNT,EMS,CDEK. We could also arrange sea shipping.

For Custom and Batch orders, if mould and blank avaliable, Connecting rod lead time: 60-70 days. If not,  then Developing New Mould: 1month for rods

Yes, For connecting rod, we will do  blank dimension Inspection, Tolerance Inspection, Machining Precision Inspection and Balance Weight Inspection.
 

Test method: ASTM E8,standard H-beam connecting rods Average reach :15000-1600PSI, you can check our certification page for test report.

Material: 4340 forged steel/40CrNiMoA/EN24. Heat Treatment: HRC34-38     

Rifle drilling also called Forced Pin Oiling(FPO), it means oiling channel from big end to piston pin. rifle drilling increases wrist pin longevity by providing additional lubrication, hurricane rifle drilling application is available in all of our 4340 connecting rods and sold separately, please contact us for more information.

Yes, if we have available stock, then Hongtai could supply MOQ in 1 set, please feel free to check stock with hongtai sales team.

Yes, Of course. Please leave us message with  engine model and beam you are interested.

 Degree Centigrade:860℃-880℃

Main size: Center to center length: +/- 0.05mm; Big end bore:+ 0.013mm; Small end bore:+ 0.005mm; Big End width: +/-0.02mm;
Pin End width: +/-0.05mm; No note tolerance:+/-0.15mm

Material:QAL10-3-1.5  width:0.6mm-0.8mm. Elements: Al (Aluminum):8.5-10.0; Mn (Manganese):1.0-2.0; Fe (Iron):2.0-4.0;Cu (Bronze)

We use precision alignment sleeves dowel. material:40Cr, HRC40-42

Balance weight +/-1g per set

MOQ:100 pieces and we accept customized connecting rod order.
 

Yes, of course, our factory provide laser logo printing service.

Sure.

Hongtai Performance Replacement ARP2000 5/16-1.500" Bolts Torque  45N*m     
Hongtai Performance ARP2000 3/8 -1.600" Bolts Torque  75N*m
Hongtai Performance ARP2000 7/16-1.600" Bolts Torque  95N*m

ARP8740 bolt                180,000PSI(YIELD STRENGTH)          200,000PSI(TENSILE STRENGTH)
Hurricane Replacement ARP2000 3/8 bolt                          211,829PSI(TENSILE STRENGTH)
ARP 2000 bolt                200,000PSI(YIELD STRENGTH)         220,000PSI(TENSILE STRENGTH)
ARP L19 bolt                 220-230,000PSI(YIELD STRENGTH)       260,000PSI(TENSILE STRENGTH)
CUSTOM AGE 625+ bolt  235-255,000PSI(YIELD STRENGTH)      260,000 PSI(TENSILE STRENGTH)
ARP AERMET bolt         260-280,000PSI(YIELD STRENGTH)       290-310,000PSI(TENSILE STRENGTH)

Yes, Rods which are larger than our forging either in length or width, can develop a new die to suit your requirements, or also can be made from billet material. Oversized rods are quoted per order and must be paid in advance. Welcome to leave message to our  staff.