- 35. What is the maximum horsepower your single connecting rods can handle?
- 34. May i know your delivery?
- 33.How to get to know your company quickly and reliably?
- 32. what is hardness of your S/E bushing dowel?
- 31. If I buy your products, how to guarantee the quality and after-sales service?
- 29. What heat treat your connecting rods?
- 28. Can you provide the conrods of 300M?
- 27.Can you provide design services?
- 26.What kinds of surface designs you can offer?
- 23. What is your 4032 Aluminium chemical element?
- 17. How many PSI your connecting Rods hold?
- 16. What's your rods material and hardness?
- 15. What is rifle drilling?
- 12. What's heat treatment temperature when forming forgings( blanks)?
- 11. What is your connecting rod tolerance?
- 10. What's your pin bushing material?
- 9. How to connect cap with rods?
- 8. What's your connecting rod balance weight?
- 5. Could you put my logo on connecting rods?
- 1. Do you offer OVERSIZED RODS?
- 35. What is the maximum horsepower your single connecting rods can handle?
-
Regular gasoline engines are 150 to 200 horsepower, and if is diesel engines, it can reach 200 to 250 horsepower.
- 34. May i know your delivery?
-
For customers who cooperate with our company for the first time, we will provide expedited delivery activities (30-40 days).
- 33.How to get to know your company quickly and reliably?
-
1. We can take you on a video call to show you around our factory.
2. You can find out more about our company by clicking on YouTube and watching the video.
- 32. what is hardness of your S/E bushing dowel?
-
Our conrods of S/E bushing dowel is HB200.
- 31. If I buy your products, how to guarantee the quality and after-sales service?
-
We have a large number of mature databases. Even if you provide little data, we can minimize source errors during our design. And our products are 100% tested.
- 29. What heat treat your connecting rods?
-
The heat terat is HRC 34-38.
- 28. Can you provide the conrods of 300M?
-
Yes, this is widely used in aerospace's main load-bearing components. And our heat treatment hardness is HRC40-44, which is significantly better than 4340.
- 27.Can you provide design services?
-
Yes, just provide us with any simple data or sample and we can design it for you with our extensive in-house database.
- 26.What kinds of surface designs you can offer?
-
We support three kinds of surface design: (1) original shot blasting (2)shot blasting + grinding bright surface (3)shot blasting + gold titanium nitride
- 23. What is your 4032 Aluminium chemical element?
-
4032 chemical element including: Si: 11.0 – 13.5% Mg: 0.80 – 1.30% Cu: 0.50 – 1.30% Ni: 0.50 – 1.30% Cr: ≤ 0.10% Zn: ≤ 0.25% Fe: ≤ 1.0% Al: 81.1 – 87.2% Other each: ≤ 0.050% Other total: ≤ 0.15% You can go for our CERTIFICATION page for Hurricane 4032 piston chemical element Test Report.
- 17. How many PSI your connecting Rods hold?
-
Test method: ASTM E8,standard H-beam connecting rods Average reach :15000-1600PSI, you can check our certification page for test report.
- 16. What's your rods material and hardness?
-
Material: 4340 forged steel/40CrNiMoA/EN24. Heat Treatment: HRC34-38
- 15. What is rifle drilling?
-
Rifle drilling also called Forced Pin Oiling(FPO), it means oiling channel from big end to piston pin. rifle drilling increases wrist pin longevity by providing additional lubrication, hurricane rifle drilling application is available in all of our 4340 connecting rods and sold separately, please contact us for more information.
- 12. What's heat treatment temperature when forming forgings( blanks)?
-
Degree Centigrade:860℃-880℃
- 11. What is your connecting rod tolerance?
-
Main size: Center to center length: +/- 0.05mm; Big end bore:+ 0.013mm; Small end bore:+ 0.005mm; Big End width: +/-0.02mm;
Pin End width: +/-0.05mm; No note tolerance:+/-0.15mm - 10. What's your pin bushing material?
-
Material:QAL10-3-1.5 width:0.6mm-0.8mm. Elements: Al (Aluminum):8.5-10.0; Mn (Manganese):1.0-2.0; Fe (Iron):2.0-4.0;Cu (Bronze)
- 9. How to connect cap with rods?
-
We use precision alignment sleeves dowel. material:40Cr, HRC40-42
- 8. What's your connecting rod balance weight?
-
Balance weight +/-1g per set
- 5. Could you put my logo on connecting rods?
-
Yes, of course, our factory provide laser logo printing service.
- 1. Do you offer OVERSIZED RODS?
-
Yes, Rods which are larger than our forging either in length or width, can develop a new die to suit your requirements, or also can be made from billet material. Oversized rods are quoted per order and must be paid in advance. Welcome to leave message to our staff.